{"product_id":"aro-shaker™-magnetic-espresso-grounds-agitator-distributor","title":"ARO Shaker — Magnetic Grounds Agitator \u0026 Distributor","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eARO Shaker™\u003c\/strong\u003e is a precision-engineered espresso grounds agitator that breaks up clumps formed during grinding, helping fine and coarse particles mix evenly to support consistent water flow through the puck. \u003c\/p\u003e\n\u003cp\u003eCoffee grounds do not exit the grinder uniformly. Static, burr geometry, and grind path create clumps and density variations that carry directly into the basket. Adding a simple shaking step before dosing into the basket helps separate and aerate the grounds, creating a more consistent starting point for distribution and tamping. This reduces the amount of correction needed later in the workflow and makes puck preparation more forgiving and repeatable.\u003c\/p\u003e\n\u003cp\u003eBuilt as part of the ARO PortaStack system, the Shaker docks securely to the \u003cstrong\u003eARO PortaFunnel™ – PortaStack Edition\u003c\/strong\u003e for a controlled, spill-resistant workflow, while also functioning directly on a portafilter basket. Unlike generic shakers that sit too close to the basket and create mess, the ARO Shaker is designed with an elevated drop height. When stacked on the PortaFunnel, it positions the grounds approximately 16mm above the top of the basket, allowing grounds to fall and redistribute more evenly while eliminating spills.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePortaStack-Compatible Magnetic Docking System:\u003c\/strong\u003e The base of the shaker incorporates six custom arc magnets that align and attach to the steel docking ring in the ARO PortaFunnel – PortaStack Edition. The connection is secure and stable, enabling controlled one-handed operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetically Secured Cap:\u003c\/strong\u003e The cap magnetically interfaces with the shaker body using the same arc magnet and steel target architecture as the PortaStack docking system. This magnetic connection helps keep the shaker spill-resistant during handling and workflow transitions. \u003cem\u003eHold the cap in place during shaking!\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable-Polarity Magnetic Plug:\u003c\/strong\u003e The plug unscrews into two halves to access a spring-retained magnet that can be flipped to change magnetic polarity. This allows compatibility with existing shaker landing zones, such as grinders or dosing stands with magnetic targets. The magnet can also be removed entirely when no magnetic attraction is desired.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntentional Magnetic Hierarchy:\u003c\/strong\u003e The magnetic strength between the shaker body and funnel is stronger than the cap-to-body connection. When removing the lid and plug, the shaker body remains securely attached to the funnel for an efficient workflow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElevated Drop Height for Even Distribution:\u003c\/strong\u003e When stacked on the PortaFunnel, the shaker sits approximately 16 mm above the top of the basket. This added drop height allows grounds to flow more freely as they enter the basket, promoting a more even distribution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Use Base Design:\u003c\/strong\u003e The contoured base includes a seating lip that allows the shaker to rest directly on a portafilter basket without a PortaFunnel, enabling use as a standalone shaker or within any preferred workflow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium Aluminum Construction:\u003c\/strong\u003e Crafted from precision-machined aluminum, all components are anodized for a durable, scratch-resistant finish. A satin exterior helps hide fingerprints and smudges, while polished interior surfaces and the polished plug reduce grounds sticking and simplify cleaning. Like all ARO tools, it’s built for long-term use and premium feel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"instructions\"\u003eUsage Instructions\u003c\/h2\u003e\n\u003cp\u003eThe ARO Shaker is designed to work as part of the PortaStack system or as a standalone tool on a portafilter basket. Follow the steps below for a controlled, spill-resistant workflow.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eDose:\u003c\/strong\u003e Remove the cap and leave the plug in place. Grind directly into the shaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShake:\u003c\/strong\u003e Replace the cap. Hold the shaker body with one hand and use one or two fingers to hold the cap in place. Shake vigorously for 4–8 seconds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDock:\u003c\/strong\u003e Set the shaker onto the ARO PortaFunnel – PortaStack Edition, or place it directly on top of your portafilter basket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelease Grounds:\u003c\/strong\u003e Remove the cap, lift the plug to drop the grounds, then rotate the plug handle and gently knock the bell-shaped bottom against the interior walls of the shaker to fling remaining grounds off the plug and into the basket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetach and Proceed:\u003c\/strong\u003e Replace the plug and cap, then lift the shaker off the funnel or basket to continue with distribution or tamping.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eARO Shaker\u003c\/strong\u003e is available in \u003cstrong\u003e58mm and 54mm sizes\u003c\/strong\u003e to support a wide range of portafilter basket standards.\u003c\/p\u003e\n\u003cp\u003eThe ideal use case is pairing the shaker with the \u003ca href=\"https:\/\/aroespresso.com\/products\/portafunnel-portastack-edition\" title=\"ARO® PortaFunnel – PortaStack Edition | Magnetic Docking Dosing Funnel\" target=\"_blank\"\u003e \u003cstrong\u003eARO PortaFunnel – PortaStack Edition\u003c\/strong\u003e \u003c\/a\u003e, which provides optimal alignment drop height as part of the PortaStack workflow.\u003c\/p\u003e\n\u003cp\u003eThat said, the PortaFunnel is \u003cstrong\u003enot required\u003c\/strong\u003e. The shaker can also be used directly on a portafilter basket with no funnel, or with other funnels, depending on your workflow preference.\u003c\/p\u003e\n\u003ch2\u003eSize Guidance\u003c\/h2\u003e\n\u003cp\u003eIf you plan to use the shaker with the PortaFunnel – PortaStack Edition, choose the same size shaker and funnel. If you plan to use the shaker directly on your basket without a funnel, select the size based on your basket inner diameter or tamper diameter.\u003c\/p\u003e\n\u003cp\u003eChoose the \u003cstrong\u003e58mm shaker\u003c\/strong\u003e if your basket inner diameter falls between 57mm and 58.5mm, covering E61, Lelit, and other standard 58mm machines.\u003c\/p\u003e\n\u003cp\u003eChoose the \u003cstrong\u003e54mm shaker\u003c\/strong\u003e if your basket inner diameter or tamper size is between 53mm and 54mm. This includes systems such as Breville\/Sage, Dalla Corte, San Marco, La Spaziale, 9Barista, and similar standards.\u003c\/p\u003e\n\u003cp\u003ePlease message us with any questions about compatibility.\u003c\/p\u003e\n\u003ch3\u003eWhy Two Shaker Sizes?\u003c\/h3\u003e\n\u003cp\u003eWe designed two shaker diameters to improve alignment and usability across both larger and smaller basket standards while maintaining appropriate internal volume for common dose ranges. The 58mm shaker is slightly wider and shorter at 76mm diameter and 78mm tall, while the 54mm shaker is slightly narrower and taller at 70mm diameter and 86mm tall. This dimensional tuning keeps capacity and performance consistent across both sizes without compromising fit or workflow.\u003c\/p\u003e\n\u003ch2\u003eWhat’s in the Box?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eARO Shaker body\u003c\/li\u003e\n\u003cli\u003eMagnetic cap\u003c\/li\u003e\n\u003cli\u003eTwo-piece magnetic plug with adjustable-polarity magnet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCare and Maintenance\u003c\/h2\u003e\n\u003cp\u003eBrush off loose grounds after use or wipe clean with a dry or slightly damp cloth. The plug can be disassembled for cleaning. Hand wash components with mild soap and lukewarm water if needed. Rinse thoroughly and dry completely before reassembly. \u003cstrong\u003eNot dishwasher safe.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eOther Useful Info\u003c\/h2\u003e\n\u003cp\u003eThe 58mm ARO Shaker measures 76mm in diameter and 78mm tall with the cap installed, or 69mm tall without the cap.\u003c\/p\u003e\n\u003cp\u003eThe 54mm ARO Shaker™ measures 70mm in diameter and 86mm tall with the cap installed, or 78mm tall without the cap.\u003c\/p\u003e","brand":"ARO Espresso","offers":[{"title":"58mm \/ Black","offer_id":68430718009586,"sku":"CFE-PORSTK-SHK-58-BLK","price":72.0,"currency_code":"USD","in_stock":true},{"title":"58mm \/ Silver","offer_id":68430718042354,"sku":"CFE-PORSTK-SHK-58-SLV","price":72.0,"currency_code":"USD","in_stock":true},{"title":"54mm \/ Black","offer_id":68430718075122,"sku":"CFE-PORSTK-SHK-54-BLK","price":72.0,"currency_code":"USD","in_stock":true},{"title":"54mm \/ Silver","offer_id":68430718107890,"sku":"CFE-PORSTK-SHK-54-SLV","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/5302\/1170\/files\/AROPortaStack_Shaker_FrontView_Hero_Black.jpg?v=1793772175","url":"https:\/\/parttimebarista.com\/products\/aro-shaker%e2%84%a2-magnetic-espresso-grounds-agitator-distributor","provider":"Part Time Barista","version":"1.0","type":"link"}