Puck Prep: The Complete Guide
Puck prep is everything that happens to the coffee between the grinder and the machine — and it decides more shots than the machine does. The same beans, the same grinder, the same Breville: prepped well, the shot runs even and tastes sweet. Prepped badly, it channels, sprays, and tastes sour and bitter in the same sip. This page is the whole routine, in order, with the tools for each step.
Step 1 — Dose by weight
Weigh the grounds, every time. Volume changes with every bean and every grinder setting; weight does not. Most home baskets are built around 18 grams. A 0.1g scale and a dosing cup or dosing ring keep the grounds in the basket instead of on the counter. Our dosing and measuring collection covers this step.
Step 2 — Distribute with a WDT tool
Ground coffee clumps, and clumps channel: water finds the gaps, races through them, and leaves the dense parts under-extracted. A WDT tool — a handle with fine needles — stirs the grounds in the basket to break up clumps and level the bed before the tamp. It is the cheapest fix in espresso and the one that cures shots that taste sour and bitter at once. See tampers and WDT tools.
Step 3 — Tamp level
The tamp's job is a flat, even surface at consistent pressure — not maximum force. A spring-loaded tamper removes the guesswork by applying the same pressure every time, and a tamping station or mat gives the portafilter a stable, clean place to sit while you work. Match the tamper to your basket size: 54mm vs 58mm explains the sizes, and the Machine Compatibility Guide lists yours.
Step 4 — Puck screen and the pull
A puck screen sits on top of the tamped coffee. It spreads the water evenly across the puck and keeps coffee oils off the shower screen, so the group head stays cleaner. From there the routine hands off to the machine — dose, yield and time take over, and our dial-in hub walks that method end to end.
Step 5 — Knock out and reset
Spent pucks go in a knock box, not the sink — one firm knock and the puck drops whole, which is also a diagnostic: a puck that crumbles or comes out soupy is telling you the prep or the grind needs work. Knock boxes, mats and stations live in Mats, Stations & Knock Boxes.
The shortcut: the Dial-In Kit
The five pieces above — dosing ring, dosing cup, WDT tool, spring tamper and the station pieces — are bundled for Breville 54mm owners as the 54mm Dial-In Kit. Everything else, for every machine size, is in Espresso Prep.